Skip to content
Speaker Tester

Tones · 20 Hz–20 kHz

Online Tone Generator

Play a pure sine tone at any frequency from 20 Hz to 20 kHz, or open one of the 28 dedicated test tone pages below. Each one explains what that frequency is good for, from subwoofer checks to tuning and hearing.

  • Free
  • No download
  • No sign-up
  • Audio stays on your device

Loading…

Tone

440Hz

Mode
Output
Frequency

Press “Mark” (M) to note frequencies you want to compare.

20%

Start quiet. Lower your device volume before you press play, then raise it slowly. Test tones are pure and can be louder than music at the same setting.

All test tones

Each page plays one frequency with a waveform selector and Left/Both/Right output, and explains what it is useful for.

What a tone generator is for

A tone generator plays a single, steady frequency. Because there is nothing else in the sound, problems that hide inside music become obvious: a cabinet that buzzes at one note, a subwoofer that disappears at another, a tweeter that has stopped working, or one ear that is quieter than the other. Musicians use reference tones like 440 Hz to tune, engineers use 1 kHz to line up levels, and car audio installers use low tones to find rattles.

Every tone here is generated live by your browser’s Web Audio API, so you can choose any frequency to the hertz with no compression and nothing to download.

Choosing the right frequency

Sub-bass tones from 20 to 60 Hz test subwoofers, room modes and mains hum. Bass tones from 80 to 250 Hz cover crossovers, upper-bass punch and muddy rooms. The midrange from 300 Hz to 2 kHz holds voices, tuning notes and the 1 kHz reference. Treble tones from 4 to 20 kHz check tweeters and the upper limit of your hearing.

For sweeps across the whole range, use the frequency sweep test, which shows the frequency live as it rises so you can mark where sound appears and disappears.

Start quietly with every tone. High frequencies sound much louder than low ones at the same setting, and tones you can barely hear can still damage tweeters if played loudly.

Frequently asked questions

How do I play a specific frequency?

Choose the nearest preset, then drag the fine-tune slider or use the ↑ ↓ arrow keys to move in semitone steps. The readout shows the exact frequency.

Is this tone generator free?

Yes. It runs entirely in your browser with no sign-up, no downloads and no audio leaving your device.

Can I use this to test my hearing?

It can show differences between ears and roughly how high you hear, but it can’t measure hearing levels. See an audiologist for a proper test.

Keep testing

See All Tests

Want to check everything in one go? Run the full speaker test on the homepage.