Skip to content
Speaker Tester

Frequency · 20–200 Hz

Bass Test

Play any low frequency from 20 to 200 Hz and see exactly what’s playing. Find the lowest note your speakers or headphones can reproduce, and listen for buzzing or rattles.

  • Free
  • No download
  • No sign-up
  • Audio stays on your device

Loading…

Tone

60Hz

Mode
Output
Frequency

Sweep up and press “Mark” the moment you start hearing the tone.

20%

Start quiet. Lower your device volume before you press play, then raise it slowly. Test tones are pure and can be louder than music at the same setting.

How to read the result

Laptop and phone speakers typically start at 100–200 Hz. Bookshelf speakers reach 45–70 Hz, floor-standers 30–45 Hz, and a good subwoofer or pair of headphones 20–30 Hz. Below about 30 Hz you’ll feel pressure more than hear a pitch.

If a low tone sounds like a higher buzz, the speaker is distorting: it’s producing harmonics instead of the fundamental. Lower the volume and try again.

Frequently asked questions

What Hz is best for a bass test?

Use 40–60 Hz to check deep bass and 80–100 Hz to check punch, then sweep 20–200 Hz to cover the whole range. Bass spans roughly 20–250 Hz: sub-bass below 60 Hz is felt as much as heard, and mid-bass from 60 to 250 Hz gives kick drums and bass guitar their weight. A speaker that plays 40 Hz cleanly sounds full with almost any music. Phones, laptops and small speakers usually fade out below 80–100 Hz.

Why can’t I hear 20 Hz?

Human hearing is very insensitive at 20 Hz, and most speakers can’t move enough air to produce it. You may feel it rather than hear it. Small speakers, phones and laptops usually produce nothing at all below 80–100 Hz.

Can a bass test damage my speakers?

At high volume, yes, especially small speakers and laptop drivers trying to play very low tones. Start quietly, raise the level gradually, and stop if you hear knocking, popping or harsh distortion.

What’s the difference between this and the subwoofer test?

This page covers the whole bass range up to 200 Hz for any speaker or headphones. The subwoofer test focuses on 20–120 Hz with presets around typical crossover points, for setting up and checking a dedicated sub.

Keep testing

See All Tests

Want to check everything in one go? Run the full speaker test on the homepage.